16mm 20mm Hard Chrome Plated Shaft Chrome Hydraulic Rod

Basic Information
Place of Origin: Shaanxi, China (Mainland)
Brand Name: OEM
Certification: ISO9001
Model Number: Chrome Plated Rod
Minimum Order Quantity: Negotiation
Price: Negotiation
Packaging Details: Wooden Box (fumigation)
Delivery Time: base on order
Payment Terms: L/C,D/A,D/P,T/T,Western Union,Money Gram payments for offline orders.
Supply Ability: 6000 Ton/Tons per Year
Detail Information
Name: Hard Chrome Plated Shaft Surface Treatment: Hard Chrome Plated/induction Hardened/Quenched
Material: 42CrMo (SAE4140), 20MnV6,St52, Stainless Steel Heat Treated: Not Hardened / Induction Hardened
Hardness: HRC:58-62 Dia: 16mm 20mm
High Light:

20mm Hard Chrome Plated Shaft


16mm Hard Chrome Plated Shaft


16mm Chrome Hydraulic Rod

Product Description

16mm 20mm Hard Chrome Plated Shaft Chrome Hydraulic Rod​


What is the difference between chrome-plated rods and polished rods?

The chrome-plated rod is chrome-plated, usually hard chrome-plated, and its appearance hardness and wear resistance are much better than ordinary steel rods; the polished rod is only polished, it may be polished to the original rod, or it may be It is polished after chrome plating. The former has low surface hardness, while the latter has high surface hardness, good wear resistance, and better lubricity than chrome-plated rods.
The hardness of the polished rod is not high. After chrome plating with chrome-plated rods, the hardness of the surface is improved and the wear resistance of the surface is increased. For example, the shock absorbers of cars and motorcycles, and engine cylinders are all plated with hard chrome. Iron is easy to rust when exposed to the air, and chromium has strong oxidation resistance. After chrome plating, it can play a certain antirust effect.
The tolerance of chrome-plated rods is usually g6 or h7, and the thickness of chrome plating is 0.8~3mm. A3 steel is a name in the past, and now it is called Q235 steel. The yield strength is 235MPa, the tensile strength is 375-460MPa; the elongation is 26%. Among the boards, Q235 is the most common raw material, which belongs to the general board series, so the difference between chrome-plated rods and polished rods: wear resistance and corrosion resistance, of course, the price of chrome-plated rods is also high.




16mm 20mm Hard Chrome Plated Shaft Chrome Hydraulic Rod
Metric Diameter:3mm,4mm,5mm,6mm,8mm,10mm,12mm,16mm,20mm,25mm.....300mm
Inch Diameter:6.35mm.9.525mm.12.7mm,15.875mm,19.05mm,25.4mm,31.75mm,38.1mm
Full Length 6000mm, it can be cut off according to customer requirement.
ISO9001:2008 standard
CK45 (SAE1045, S45C), 42CrMo (SAE4140), 20MnV6,St52, Stainless Steel
Surface finish
Hard Chrome / None Chrome
Plating Thickness
10um ~ 20um in radius.
Heat treated
Not Hardened / Induction Hardened
Hardness Depth
g6, h6, h7 or according to your requirement.
Less than 1.5μm
Less than 1.5μm of 100mm (Rmax)
Less than 3.0μm (Rmax)
Long life and low noise
End Stepped, End Tapped, End Tread, Wrench Flats, Cross Drilled Holes, Key Groove, Set Screw Grooved, and so on.

technical standard:

Outer diameter accuracy: f7, f8, h7
Surface finish: ≦Ra0.4S
Roundness: ≦0.01mm
Straightness: ≦0.15/1000mm
Hard chrome plating thickness: 0.015~0.05mm (can be customized according to customer requirements)
Surface hardness: HB220-260
Standard outer diameter: ¢3~¢120
Standard length: 1000-6000mm
Material: S45C (45#), 40Cr, GCr15, 2Cr13, 42CrMo, SUS304, SUS303, SUS316, etc.

Contact Details

Phone Number : 18629090689